Lobe Flex (Sanitary)

> Product > Lobe Flex (Sanitary)
 
Features
  It is designed that the suction port diameter is the same as the lobe rotor height so that cavitations or pulsation doesn’t occur.
  It allows handling solids such as strawberries, grapes, or peaches without damage.
  It is easy to be disassembled and assembled.
  When speed reduction is needed, it can be fitted with its own reduction gear so that common motors can be used.
  The mechanical seals vary according to the fluids with high pressure, high viscosity, high density of slurries, and chemicals.
 
Applications
 

Where high suction pressure is required (Max. 9.5m)

  When pumping high viscous liquid (Max. 1 million cPs)
 

When pumping abrasive slurries such as sand, gravel, concrete, mortar, mud, slaked lime, excretion, paint, grease,
  plastics, etc.

  When pumping solids such as cherries, strawberries, syrup, jams, margarines, honey, curry sauces, liquid chocolate,
  pastes, etc. without damage.
  Where accurate flow rates are required ? medicine, packing for precise volumes of liquids
  When pumping fluids with high temperature: Rubber rotors up to 200℃, Metal rotors up to 450℃
 
How It Works
 
Specification
SANITARY LOBE FLEX PUMP
MODEL HP PRESSURE
㎏/㎠
PORT SIZE
FLOW RATE (l/m)

cc/Rev

4P
6P 8P
60Hz 50Hz 60Hz 50Hz 60Hz 50Hz
4P 6P 1750(RPM) 1450(RPM) 1120(RPM) 950(RPM) 830(RPM) 700(RPM)
DSL-1S 1 1/2 10 1S Ferrule, Male 166 137 106 90 79 67 95
DSL-1.5S 2 1 10 1.5S Ferrule, Male 245 203 157 133 116 98 140
DSL-1.5SL 3 2 15 1.5S Ferrule, Male 508 420 325 276 240 203 290
DSL-2S 3 2 15 2S Ferrule, Male 647 536 414 351 307 259 370
DSL-2SL 5 3 15 2S Ferrule, Male 1032 855 660 560 490 413 590
DSL-2.5SL 7.5 5 15 2.5S Ferrule, Male 1242 1030 795 674 589 497 710
DSL-3S 10 7.5 15 3S Ferrule, Male 1540 1276 986 836 730 616 880